# Locking radial-grip insert template & dieline

> Locking radial-grip insert dieline (DM-LOCKING-GRIP-INSERT-01). Set your size and fold it in 3D free; download PDF, SVG or DXF with Pro.

Canonical: https://dielinemaker.com/dielines/locking-grip-insert

A single blank with a floor, two side walls and overlapping aperture decks. Scored radial fingers fold into each opening, while struck side tongues engage the opposite deck aprons. A parametric template. Change the length, width, height, board and options in the editor; the dieline and the 3D preview follow each change.

## Default size

- Inside size: 240 × 80 × 45 mm
- Outside: 240 × 81.8 × 46.8 mm
- Flat blank: 240 × 404.4 mm
- Manufacturing (score to score): 240 × 80 × 45 mm

## Specifications

| Specification | Value |
| --- | --- |
| Reference | DM-LOCKING-GRIP-INSERT-01 |
| Family | Trays & lids |
| Inside size | Insert length 240 · Insert width 80 · Lower deck height 45 mm |
| Size range | Insert length 80–600 · Insert width 40–300 · Lower deck height 15–160 mm |
| Parts | One blank |
| Board area | 0.097 m² (about 4 up on a 720 × 1020 mm sheet) |
| Default board | Folding boxboard 400 g (0.6 mm caliper) |
| Board options | Folding boxboard 400 g, Kraft board 350 g, SBS white board 350 g, F-flute micro corrugated, SBS white board 18 pt |
| Good for | radial grip insert, finger aperture insert, three bottle insert, double deck insert, locking insert, retention collar |

## Before you choose this template

### Will the locking radial-grip insert dieline fit my product?

A single blank with a floor, two side walls and overlapping aperture decks. Scored radial fingers fold into each opening, while struck side tongues engage the opposite deck aprons. The default dimensions in inside-size mode are Insert length 240 mm, Insert width 80 mm, Lower deck height 45 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

### Can I change the size and design?

Yes. The supported ranges are Insert length 80–600 mm, Insert width 40–300 mm, Lower deck height 15–160 mm. At the default settings, the editor also exposes Product openings, Aperture outer diameter, Radial finger depth, Fingers per opening, Finger fold angle. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

### Which materials can I choose?

The default is Folding boxboard 400 g (0.6 mm caliper). This structure allows Folding boxboard 400 g, Kraft board 350 g, SBS white board 350 g, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

### Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

### Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

### Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

[Compare plans and downloads](https://dielinemaker.com/pricing)

## Downloads and previews

The dieline downloads as PDF (with dimensions), Illustrator (.ai), SVG (vector, by layer) and DXF (for CAD and cutters). These downloads are part of the Pro and Business plans; the previews below are public.

- Flat preview (PNG): https://dielinemaker.com/dielines/locking-grip-insert/preview.png
- Folded preview (PNG): https://dielinemaker.com/dielines/locking-grip-insert/folded.png
- Customize in the editor: https://dielinemaker.com/create?style=locking-grip-insert
- Open in the 3D Studio: https://dielinemaker.com/studio?style=locking-grip-insert

## Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

- Product openings (count)
- Aperture outer diameter (mm)
- Radial finger depth (mm)
- Fingers per opening (count)
- Finger fold angle (°)

## Ready-sized locking radial-grip insert presets

The same structure with sizes, boards and options set for a use.

- - [Three-opening locking grip insert](https://dielinemaker.com/dielines/locking-grip-insert--locking-grip-three) - 240 × 80 × 45 mm · DM-LOCKING-GRIP-INSERT-01

## Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

- - [Cradle end-wall insert](https://dielinemaker.com/dielines/saddle-endwall-insert) - DM-SADDLE-ENDWALL-INSERT-01 · 220 × 90 × 60 mm · Trays & lids
- - [Folded compartment insert](https://dielinemaker.com/dielines/folded-compartment-insert) - ECMA F80.21.00.00 · 160 × 80 × 100 mm · Trays & lids
- - [Flat inlay with fold-up tabs](https://dielinemaker.com/dielines/tabbed-flat-inlay) - ECMA F80.01.00.00 · 200 × 200 × 75 mm · Trays & lids
- - [Folded support rail](https://dielinemaker.com/dielines/folded-support-rail) - DM-SUPPORT-RAIL-01 · 240 × 30 × 25 mm · Trays & lids
- - [Diagonal compartment insert](https://dielinemaker.com/dielines/diagonal-compartment-insert) - ECMA F80.23.00.00 · 140 × 70 × 90 mm · Trays & lids
- - [Stepped-edge divider frame](https://dielinemaker.com/dielines/stepped-edge-divider) - DM-STEPPED-EDGE-DIVIDER-01 · 240 × 160 × 80 mm · Trays & lids

## Related

- [Trays & lids templates](https://dielinemaker.com/dielines?category=tray)
- [Locking radial-grip insert mockup](https://dielinemaker.com/mockups/locking-grip-insert)
- [How to read a dieline](https://dielinemaker.com/blog/what-is-a-dieline)
- [Inside vs outside box dimensions](https://dielinemaker.com/blog/box-dimensions-inside-vs-outside)
- [All dieline templates](https://dielinemaker.com/dielines)