Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-AMP-01Labels
Glass ampoule dieline
A plastic twist-off single-dose ampoule (single or strip of up to 5) or a glass break-neck ampoule. Print the flat front of the body or the glass label band. A ready-sized preset of the single-dose ampoule — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside12 × 12 × 65 mm
Outside12 × 12 × 65 mm
Flat blank37.7 × 20.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-AMP-01
- Inside size
- Body width / diameter 12 · Body thickness 12 · Overall height 65 mm
- Size range
- Body width / diameter 8–40 · Body thickness 5–30 · Overall height 40–140 mm
- Manufacturing
- 12 × 12 × 65 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.001 m² · about 624 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Type2 options
- Material4 options
The single-dose ampoule family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this glass ampoule yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.