Skip to content
DielineMaker
Start designing free
Double anchor lock folder
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-ANCHOR-LOCK-FOLDER-01Cards & tags

Double anchor lock folder dieline

A flat folder with no depth: dust flaps fold in, then two covers overlap across the back panel and two anchor-shaped tabs lock through slits in the inner cover. An optional film window shows the contents from the back. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside160 × 240 mm
Outside161 × 241 mm
Flat blank364 × 281.6 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-ANCHOR-LOCK-FOLDER-01
Inside size
Width 160 · Height 240 mm
Size range
Width 60–450 · Height 60–500 mm
Manufacturing
160.5 × 240.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.089 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350SBS 300FBB 400Kraft 350Black 350GD2 350SBS 18 pt
Good for
double anchor lockanchor lock folderanchor lockno depth folderflat folderdocument folderlocking folderpresentation folderwindow folderno glue closure

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Bleed 3 mm
Double anchor lock folder flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 160 × 160 × 240 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

3 per sheet · Folder
3 copies of Folder on the stock sheet

Not proven optimal: upper bound 4 ups, within 1 up (25.0 %).

Open in editor with this sheet

How it folds

The double anchor lock folder erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the dust flaps inDust flap and 1 more
  2. 2
    Close the end flapsInner cover
  3. 3
    Close the end flapsOuter cover
  4. 4
    Lock the tabsAnchor tab and 1 more
BackDust flap · 1Dust flap · 1Inner cover · 2Front · 3
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-ANCHOR-LOCK-FOLDER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Back panel160 × 240L × H
Dust flap ×2158 × 20.8–
Inner cover96 × 240– × H
Outer cover96 × 240– × H
Anchor tab ×212 × 22.3–

Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

  • Cover depthmm
  • Dust flap depthmm
  • Anchor tab widthmm
  • Anchor tab depthmm
  • Back windowon / off

Ready-sized double anchor lock folder presets

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the double anchor lock folder dieline fit my product?

A flat folder with no depth: dust flaps fold in, then two covers overlap across the back panel and two anchor-shaped tabs lock through slits in the inner cover. An optional film window shows the contents from the back. The default dimensions in inside-size mode are Width 160 mm, Height 240 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Width 60–450 mm, Height 60–500 mm. At the default settings, the editor also exposes Cover depth, Dust flap depth, Anchor tab width, Anchor tab depth, Back window. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, Grey-back duplex 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All cards & tags templates

Make this double anchor lock folder yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.