Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureShipping
Three-compartment gift insert dieline
Parallel upright divider sheets locate through paired slots in a separate base. Fold and glue their feet beneath the raised base to hold each wall in place. Rotate the finished insert to divide along the other box direction. A ready-sized preset of the slotted-base parallel dividers — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside240 × 140 × 80 mm
Outside240 × 140 × 83.2 mm
Flat blank240 × 140 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Base length 240 · Base width 140 · Wall height above base 80 mm
- Size range
- Base length 60–800 · Base width 50–600 · Wall height above base 20–400 mm
- Manufacturing
- 240 × 140 × 81.6 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Slotted locating base, Base-mounted divider 1, Base-mounted divider 2
- Board area
- 0.057 m² · about 12 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KF-fluteSBS 350Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base plateSlotted locating base | 240 × 140 | L × W |
| Divider wall 1Base-mounted divider 1 | 136 × 81.6 | – × H + T |
| Under-base glue foot ×2Base-mounted divider 1 | 24.5 × 12 | – |
| Divider wall 2Base-mounted divider 2 | 136 × 81.6 | – × H + T |
| Under-base glue foot ×2Base-mounted divider 2 | 24.5 × 12 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Compartmentscount
- Under-base glue footmm
The slotted-base parallel dividers family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this three-compartment gift insert yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.