Skip to content
DielineMaker
Start designing free
Tuck top, economy glued bottom
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-ECONOMY-SEAL-END-01Tuck end

Tuck top, economy glued bottom dieline

Reclosable tuck lid over an economy glued bottom. A ready-sized preset of the economy seal end — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside120 × 50 × 170 mm
Outside121 × 51 × 171 mm
Flat blank353.5 × 285 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-ECONOMY-SEAL-END-01
Structure
Economy seal end
Inside size
Length 120 · Width 50 · Height 170 mm
Size range
Length 20–400 · Width 12–200 · Height 20–500 mm
Manufacturing
120.5 × 50.5 × 170.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.081 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350SBS 300GD2 350FBB 400Kraft 350Black 350F-fluteSBS 18 pt
Good for
tuck topglued bottomreclosablemixed endseconomy seal endeconomy overlap seal endeconomy endseal endglued endboard saving

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Tuck top, economy glued bottom flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 120 × 50 × 170 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

4 per sheet · Carton
4 copies of Carton on the stock sheet

Not proven optimal: upper bound 8 ups, within 4 ups (50.0 %).

Open in editor with this sheet

How it folds

The tuck top, economy glued bottom erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap
  2. 2
    Fold the dust flaps inTop dust flap, Dust flap and 2 more
  3. 3
    Tuck the flaps inTop tuck, Inner glue lip
  4. 4
    Close the end flapsTop closure, Bottom seal flap
FrontLeft · 1Back · 1Right · 1Top · 4Bottom · 4
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-ECONOMY-SEAL-END-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front120.5 × 170.5L + T × H + T
Left side50.5 × 170.5W + T × H + T
Back120.5 × 170.5L + T × H + T
Right side50 × 170.5W × H + T
Glue flap12 × 170.5– × H + T
Top closure120.5 × 49.5L + T × W − T
Top tuck119.5 × 15L − T × –
Top dust flap50.5 × 32.5W + T × –
Top dust flap50 × 32.5W × –
Dust flap50.5 × 17.5W + T × –
Dust flap50 × 24.5W × –
Inner glue lip120.5 × 17.5L + T × –
Bottom seal flap120.5 × 50L + T × W

Adjustable in the editor

Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.

  • Top end2 options
  • Tuck depthmm
  • Slit lockon / off
  • Inner lip depthmm
  • Outer flap extramm
  • Dust flap depthmm

The economy seal end family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the tuck top, economy glued bottom dieline fit my product?

Reclosable tuck lid over an economy glued bottom. The default dimensions in inside-size mode are Length 120 mm, Width 50 mm, Height 170 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 20–400 mm, Width 12–200 mm, Height 20–500 mm. At the default settings, the editor also exposes Top end, Tuck depth, Slit lock, Inner lip depth, Outer flap extra, Dust flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Grey-back duplex 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this tuck top, economy glued bottom yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.