Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-HANDLE-END-TRAY-01Carriers
Carry tray with tall end handles dieline
A carry tray whose end walls rise as pierced handles, closed by two half covers meeting between them. A ready-sized preset of the tray with tall end handles and opposed covers — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 200 × 90 mm
Outside303.2 × 203.2 × 93.2 mm
Flat blank640 × 588 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-HANDLE-END-TRAY-01
- Inside size
- Length 300 · Width 200 · Height 90 mm
- Size range
- Length 120–600 · Width 80–400 · Height 30–300 mm
- Manufacturing
- 301.6 × 201.6 × 91.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.243 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteKraft 350
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-HANDLE-END-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 300 × 200 | L × W |
| Long wall ×2 | 300 × 90 | L × H |
| Handle end wall ×2 | 170 × 200 | – × W |
| Half cover | 294.8 × 108 | – |
| Half cover | 294.8 × 100 | – |
| Glue flap ×4 | 86 × 20 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Handle heightmm
The tray with tall end handles and opposed covers family
The same structure with sizes, boards and options set for a use.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this carry tray with tall end handles yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.