Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-OPPOSED-COVER-TRAY-01Trays & lids
Tray with opposed covers in slotted ends dieline
A tray whose two broad covers fold in from the front and back and lock by end tabs in long slots in raised end walls. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 200 × 100 mm
Outside303.2 × 203.2 × 103.2 mm
Flat blank550 × 597.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-OPPOSED-COVER-TRAY-01
- Inside size
- Length 300 · Width 200 · Height 100 mm
- Size range
- Length 80–600 · Width 60–400 · Height 30–300 mm
- Manufacturing
- 301.6 × 201.6 × 101.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.239 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteKraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-OPPOSED-COVER-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 300 × 200 | L × W |
| Front wall | 300 × 100 | L × H |
| Back wall | 300 × 100 | L × H |
| Handle end wall ×2 | 125 × 200 | – × W |
| Cover ×2 | 300 × 98.7 | L × – |
| Glue flap ×4 | 95.8 × 20 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- End upright risemm
- Hand openings in coverson / off
Ready-sized tray with opposed covers in slotted ends presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tray with opposed covers in slotted ends yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.