Skip to content
DielineMaker
Start designing free
Shallow masu tray
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-MASU-BOX-01Trays & lids

Shallow masu tray dieline

A low masu tray for sweets, clips or jewellery, without a lid. A ready-sized preset of the origami masu box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside90 × 22 mm
Outside90.6 × 22.2 mm
Flat blank190.6 × 190.6 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-MASU-BOX-01
Structure
Origami masu box
Inside size
Box width 90 · Box height 22 mm
Size range
Box width 30–140 · Box height 10–70 mm
Manufacturing
90.2 × 22.1 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.036 m²
Default board
Art paper 170 g · 0.16 mm caliper
Board options
Paper 170Kraft 120Paper 200SBS 210Kraft 190
Good for
traysweetsjewellerymasu boxorigami boxorigami box templateorigami box with lidmasu box templatetraditional origami boxpaper box from a square

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Reverse crease
  • Crease
  • Cut
  • Bleed 3 mm
Shallow masu tray flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 90 × 90 × 22 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

15 per sheet · Box sheet
15 copies of Box sheet on the stock sheet

Proven optimal: no layout fits more than 15 ups on this sheet.

Open in editor with this sheet

How it folds

The shallow masu tray erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the flapsInner wall (folded over the rim), Corner wing and 4 more
  2. 2
    Fold the gussetsWall, Floor point, Corner web, Corner crease and 14 more
  3. 3
    Fold the flapsInner wall (folded over the rim), Floor point, Corner wing and 5 more
BottomRight · 2Floor point · 2Back · 2Floor point · 3Left · 2Floor point · 2Front · 2Floor point · 3
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-MASU-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.16 mm for Art paper 170 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Base128 × 128–
Wall ×490.5 × 22.2– × H + T
Inner wall (folded over the rim) ×490.5 × 22.2– × H + T
Floor point ×490.5 × 45.2–
Corner web ×422.2 × 22.2H + T × H + T
Corner web ×215.7 × 31.3–
Corner wing ×822.2 × 22.2H + T × H + T
Corner web ×231.3 × 15.7–

Adjustable in the editor

Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.

  • Lid2 options

The origami masu box family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the shallow masu tray dieline fit my product?

A low masu tray for sweets, clips or jewellery, without a lid. The default dimensions in inside-size mode are Box width 90 mm, Box height 22 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Box width 30–140 mm, Box height 10–70 mm. At the default settings, the editor also exposes Lid. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Art paper 170 g (0.16 mm caliper). This structure allows Art paper 170 g, Kraft board 120 g, Art paper 200 g, SBS white board 210 g, Kraft board 190 g. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All trays & lids templates

Make this shallow masu tray yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.