Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureDisplay
1600 mm oval floor totem dieline
A continuous oval display wrap with a joining lap and two oval internal braces. The fine virtual bends represent rolling, not manufacturing score rules. Bottom tabs bond the wrap to its lower brace; confirm the bend direction and assembly with your converter. A ready-sized preset of the oval floor totem — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside600 × 250 × 1600 mm
Outside600 × 250 × 1600 mm
Flat blank1399.9 × 1618 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Width 600 · Depth 250 · Height 1600 mm
- Size range
- Width 300–900 · Depth 120–450 · Height 800–2000 mm
- Manufacturing
- 600 × 250 × 1600 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Oval display wrap, Oval internal brace, Oval internal brace
- Board area
- 2.495 m²
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute K
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Curved display face ×4Oval display wrap | 9.9 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 9.9 × 18 | – |
| Curved display face ×4Oval display wrap | 10.1 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 10.1 × 18 | – |
| Curved display face ×4Oval display wrap | 10.7 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 10.7 × 18 | – |
| Curved display face ×4Oval display wrap | 11.4 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 11.4 × 18 | – |
| Curved display face ×4Oval display wrap | 12.3 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 12.3 × 18 | – |
| Curved display face ×4Oval display wrap | 13.3 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 13.3 × 18 | – |
| Curved display face ×4Oval display wrap | 14.3 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 14.3 × 18 | – |
| Curved display face ×4Oval display wrap | 15.4 × 1600 | – × H |
| Cap bonding tab ×4Oval display wrap | 15.4 × 18 | – |
27 more panels are listed in the editor’s structure step.
The oval floor totem family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 1600 mm oval floor totem yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.