Skip to content
DielineMaker
Start designing free
Epiphany cake crown
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-PAPER-CROWN-01Cards & tags

Epiphany cake crown dieline

A low crown with many small points, for a kings’ cake or a cracker. A ready-sized preset of the paper crown — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside580 × 25 mm
Outside580 × 25 mm
Flat blank614.7 × 50 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-PAPER-CROWN-01
Structure
Paper crown
Inside size
Head circumference 580 · Band height 25 mm
Size range
Head circumference 300–700 · Band height 15–80 mm
Manufacturing
580 × 25 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.023 m²
Default board
Art paper 200 g · 0.2 mm caliper
Board options
SBS 250SBS 300Paper 200Kraft 250Paper 350SBS 18 pt
Good for
epiphanykings cakegalettechristmas crackerpaper crownpaper crown templatecrown templateparty crownbirthday crownkids crown

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Cut
  • Glue area
  • Bleed 3 mm
Epiphany cake crown flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 580 × 580 × 25 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

22 per sheet · Crown band
22 copies of Crown band on the stock sheet

Not proven optimal: upper bound 26 ups, within 4 ups (15.4 %).

Open in editor with this sheet

How the blank is sized

Score-to-score panel sizes of this DM-PAPER-CROWN-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.2 mm for Art paper 200 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Band ×286.9 × 33.3–
Band ×286.9 × 41.7–
Band ×286.9 × 50–
Glue overlap ×56.9 × 25– × H

Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

  • Top edge3 options
  • Pointscount
  • Point heightmm
  • Closure2 options
  • Overlapmm

The paper crown family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the epiphany cake crown dieline fit my product?

A low crown with many small points, for a kings’ cake or a cracker. The default dimensions in inside-size mode are Head circumference 580 mm, Band height 25 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Head circumference 300–700 mm, Band height 15–80 mm. At the default settings, the editor also exposes Top edge, Points, Point height, Closure, Overlap. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Art paper 200 g (0.2 mm caliper). This structure allows SBS white board 250 g, SBS white board 300 g, Art paper 200 g, Kraft board 250 g, Art paper 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All cards & tags templates

Make this epiphany cake crown yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.