Skip to content
DielineMaker
Start designing free
Pop-up box card for 5 × 7 in envelopes
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-POP-UP-BOX-CARD-01Cards & tags

Pop-up box card for 5 × 7 in envelopes dieline

A four-wall card box that is glued and posted flat, then pops up into a square box when it comes out of the envelope. Scalloped or arched wall tops and a lower front wall are options. A ready-sized preset of the pop-up box card — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside80 × 80 × 110 mm
Outside80.7 × 80.7 × 110 mm
Flat blank333.4 × 120 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-POP-UP-BOX-CARD-01
Structure
Pop-up box card
Inside size
Front width 80 · Depth 80 · Wall height 110 mm
Size range
Front width 40–200 · Depth 30–200 · Wall height 30–220 mm
Manufacturing
80.3 × 80.3 × 110.3 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.039 m²
Default board
SBS white board 250 g · 0.35 mm caliper
Board options
SBS 250SBS 300Paper 350Kraft 250SBS 350SBS 18 pt
Good for
5x7a7 envelopeweddinganniversarypop up box cardbox pop up card templatepop up box templatepop up boxpop up cube cardbox card

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Pop-up box card for 5 × 7 in envelopes flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 80 × 80 × 110 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

16 per sheet · Pop-up box card
16 copies of Pop-up box card on the stock sheet

Not proven optimal: upper bound 17 ups, within 1 up (5.9 %).

Open in editor with this sheet

How it folds

The pop-up box card for 5 × 7 in envelopes erects in 1 step, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upSide wall, Back wall, Glue tab and 1 more
FrontRight · 1Back · 1Left · 1Glue tab · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-POP-UP-BOX-CARD-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.35 mm for SBS white board 250 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front wall80.3 × 120–
Side wall ×280.3 × 110– × H
Back wall80.3 × 110– × H
Glue tab12 × 110– × H

Adjustable in the editor

Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.

  • Wall tops3 options
  • Front wall height%

The pop-up box card family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the pop-up box card for 5 × 7 in envelopes dieline fit my product?

A four-wall card box that is glued and posted flat, then pops up into a square box when it comes out of the envelope. Scalloped or arched wall tops and a lower front wall are options. The default dimensions in inside-size mode are Front width 80 mm, Depth 80 mm, Wall height 110 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Front width 40–200 mm, Depth 30–200 mm, Wall height 30–220 mm. At the default settings, the editor also exposes Wall tops, Front wall height. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 250 g (0.35 mm caliper). This structure allows SBS white board 250 g, SBS white board 300 g, Art paper 350 g, Kraft board 250 g, SBS white board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All cards & tags templates

Make this pop-up box card for 5 × 7 in envelopes yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.