

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Shadow box tray for a tube dieline
Hollow-wall tray that frames a cream or paste tube, its cap held in an arched end opening. 7 × 2.5 × 1.5 in. A ready-sized preset of the shadow box tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-SHADOW-BOX-TRAY-01
- Structure
- Shadow box tray
- Inside size
- Inside length 178 · Inside width 64 · Inside height 38 mm
- Size range
- Inside length 80–600 · Inside width 50–400 · Inside height 20–120 mm
- Manufacturing
- 179.5 × 64.5 × 38.3 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.055 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400Kraft 350GD2 350Food SBS PEFood kraft PESBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 178 × 64 × 38 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Not proven optimal: upper bound 12 ups, within 4 ups (33.3 %).
How it folds
The shadow box tray for a tube erects in 5 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upSide panel (front), Side panel (back)
- 2Fold the corner ears inCorner flap and 3 more
- 3Fold the walls upEnd panel and 1 more
- 4Fold the inner walls inEnd shadow flap, Base panel and 2 more
- 5Fold the inner walls inSide shadow flap and 1 more
How the blank is sized
Score-to-score panel sizes of this DM-SHADOW-BOX-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Bottom panel | 179.5 × 64.5 | L + 3T × W + T |
| Side panel (front) | 179.5 × 38.3 | L + 3T × H + T/2 |
| Corner flap ×4 | 30.6 × 35 | – |
| Side panel (back) | 179.5 × 38.3 | L + 3T × H + T/2 |
| End panel ×2 | 38.3 × 64.5 | W + T × H + T/2 |
| End shadow flap ×2 | 41.5 × 62.5 | – |
| Base panel ×2 | 15.3 × 60.5 | – |
| Locking tongue ×2 | 16.7 × 40.6 | – |
| Side shadow flap ×2 | 176.5 × 42.4 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- End openings2 options
The shadow box tray family
The same structure with sizes, boards and options set for a use.
Before you choose this template
Size, materials, downloads and production checks.
Will the shadow box tray for a tube dieline fit my product?
Hollow-wall tray that frames a cream or paste tube, its cap held in an arched end opening. 7 × 2.5 × 1.5 in. The default dimensions in inside-size mode are Inside length 178 mm, Inside width 64 mm, Inside height 38 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Inside length 80–600 mm, Inside width 50–400 mm, Inside height 20–120 mm. At the default settings, the editor also exposes End openings. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Kraft board 350 g, Grey-back duplex 350 g, Food SBS, PE-coated 300 g, Food kraft, PE-lined 320 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this shadow box tray for a tube yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.





