Preset
A 3D product preview with editable artwork placement. The downloads contain artwork areas; manufacturing patterns and hardware drawings are not included. The artwork is a sample from a fictional brand — swap in your own in the editor.
Sculpted cup and drum pole sign decoration template
A closed tapered cup or cylindrical drum sign head on one pole, with an optional double-sided directional lightbox below. Start with a 1000 mm top diameter, 900 mm head height and 2300 mm clearance to the head bottom. The curved decoration uses a true developed conical wrap with its seam at the rear; the second panel has separate front and back artwork. Change taper, clearance, panel and light state. Export nominal decoration placements only. Supplier fabrication, film stretch and seams, lighting, pole, anchors and wind-load engineering remain separate. A parametric template — adjust the object dimensions and decoration area to preview your artwork at size.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, with the artwork area and bleed, without a watermark. See plans
- Reference
- DM-POLESIGN-01
- Object size
- Head top diameter 1000 · Head height 900 mm
- Size range
- Head top diameter 400–1800 · Head height 300–1600 mm
- Parts
- 3 parts — Developed curved head placement · rear seam, Directional panel front, Directional panel rear
- Artwork area
- 2.930 m²
- Good for
The flat artwork area
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed.
- Artwork boundary
- Bleed 3 mm

Adjustable in the editor
Alongside dimensions, the template offers 6 options; the template and 3D preview follow each change.
- Sign head2 options
- Bottom diameter%
- Head bottom above groundmm
- Directional lightbox belowon / off
- Illumination2 options
- Pole and rims3 options
Ready-sized sculpted cup and drum pole sign presets
The same model with sizes and artwork options ready to customize.
Preset
See where an idea can go.
Original concepts inspired by real signage and retail projects, with fictional brands and native templates you can open and customize.

Give a coffee stop a distinctive silhouette.
The job
- A 1000 mm top-diameter, 750 mm bottom-diameter tapered cup head, 900 mm high, with 2300 mm clearance.
Choose your starting point
Decorate the developed tapered wrap and the two directional lightbox faces. The cup has a closed cap and one supporting pole; the starting lightbox is 900 × 240 mm. Exports are artwork placements, with supplier-approved seams, films, enclosure, electrical design, pole and foundations specified separately.
Explore the actual templates
Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.
Before you choose this template
Size, materials, downloads and production checks.
Will the sculpted cup and drum pole sign decoration template fit my product?
A closed tapered cup or cylindrical drum sign head on one pole, with an optional double-sided directional lightbox below. Start with a 1000 mm top diameter, 900 mm head height and 2300 mm clearance to the head bottom. The curved decoration uses a true developed conical wrap with its seam at the rear; the second panel has separate front and back artwork. Change taper, clearance, panel and light state. Export nominal decoration placements only. Supplier fabrication, film stretch and seams, lighting, pole, anchors and wind-load engineering remain separate. The default reference dimensions are Head top diameter 1000 mm, Head height 900 mm. Match the artwork area to your supplier’s measured print area; the displayed object dimensions do not establish production tolerances.
Can I change the size and design?
Yes. The supported ranges are Head top diameter 400–1800 mm, Head height 300–1600 mm. At the default settings, the editor also exposes Sign head, Bottom diameter, Head bottom above ground, Directional lightbox below, Illumination, Pole and rims. Add your own artwork and preview the result in 3D. Resizing changes the model and artwork reference areas.
Does this template specify the material for the product?
Exports contain the developed curved-head wrap and directional panel artwork placements for a supplied pole sign. Supplier casing, film seams, lighting, wiring, wind loads, pole, foundations and fixings remain separate; these are not manufacturing dies. Confirm the actual product material, print surface and finishing process with your supplier; a 3D appearance is not a manufacturing specification.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF artwork boundaries. Exports contain the developed curved-head wrap and directional panel artwork placements for a supplied pole sign. Supplier casing, film seams, lighting, wiring, wind loads, pole, foundations and fixings remain separate; these are not manufacturing dies.
Is this decoration template free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I manufacture the product from this download?
Exports contain the developed curved-head wrap and directional panel artwork placements for a supplied pole sign. Supplier casing, film seams, lighting, wiring, wind loads, pole, foundations and fixings remain separate; these are not manufacturing dies. Use the download to prepare and approve the printed components or decoration with your supplier.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this sculpted cup and drum pole sign yours
Set the artwork area, add your design and export the dimensioned artwork template, or stage the product in a 3D scene.






