Skip to content
DielineMaker
Start designing free
Wedding table luminary
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-TEALIGHT-LANTERN-01Shapes

Wedding table luminary dieline

A square card lantern for an LED tea light: four walls with star, dot, diamond or arched cut-outs, optional film or vellum behind them, a tuck base and an open or rimmed top. A ready-sized preset of the tea-light lantern box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside75 × 75 × 130 mm
Outside76 × 76 × 131 mm
Flat blank314 × 217.3 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-TEALIGHT-LANTERN-01
Structure
Tea-light lantern box
Inside size
Width 75 · Depth 75 · Height 130 mm
Size range
Width 50–200 · Depth 50–200 · Height 60–300 mm
Manufacturing
75.5 × 75.5 × 130.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.049 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350Black 350Kraft 350FBB 400SBS 18 pt
Good for
weddingtablecentrepieceluminarytea light lanterntealight lanternpaper lanternlantern boxcandle lanterndiwali lantern

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Wedding table luminary flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 75 × 75 × 130 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

10 per sheet · Lantern
10 copies of Lantern on the stock sheet

Not proven optimal: upper bound 13 ups, within 3 ups (23.1 %).

Open in editor with this sheet

How it folds

The wedding table luminary erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upRight wall, Back wall, Left wall, Glue flap
  2. 2
    Fold the dust flaps inBase dust flap and 1 more
  3. 3
    Fold the baseBase, Base tuck
FrontRight · 1Bottom · 3Back · 1Left · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-TEALIGHT-LANTERN-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front wall75.5 × 130.5– × H + T
Right wall75.5 × 130.5– × H + T
Base75.5 × 75.5–
Back wall75.5 × 130.5– × H + T
Base dust flap ×271.7 × 15.1–
Base tuck73.5 × 11.3–
Left wall75.5 × 130.5– × H + T
Glue flap12 × 126.5–

Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

  • Cut-outs4 options
  • Behind the cut-outs2 options
  • Top2 options
  • Tuck depthmm
  • Dust flap depthmm

The tea-light lantern box family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the wedding table luminary dieline fit my product?

A square card lantern for an LED tea light: four walls with star, dot, diamond or arched cut-outs, optional film or vellum behind them, a tuck base and an open or rimmed top. The default dimensions in inside-size mode are Width 75 mm, Depth 75 mm, Height 130 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Width 50–200 mm, Depth 50–200 mm, Height 60–300 mm. At the default settings, the editor also exposes Cut-outs, Behind the cut-outs, Top, Tuck depth, Dust flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Black-core board 350 g, Kraft board 350 g, Folding boxboard 400 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All shapes templates

Make this wedding table luminary yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.