Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCards & tags
US Letter top-bound spiral notepad dieline
Punched sheets with a continuous top-edge coil and a flip-open cover. Export the sheet and cover trim/punch templates. Glue, wire forming and bindery tolerances are supplier specifications. A ready-sized preset of the top-bound spiral notepad — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside215.9 × 279.4 mm
Outside215.9 × 279.4 mm
Flat blank215.9 × 279.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Sheet width 215.9 · Sheet height 279.4 mm
- Size range
- Sheet width 70–320 · Sheet height 90–420 mm
- Manufacturing
- 215.9 × 279.4 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Front cover, Writing sheet trim / punch reference, Card backing
- Board area
- 0.181 m² · about 9 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 300 g · 0.42 mm caliper
- Board options
- SBS 300SBS 350Kraft 350Paper 170SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Sheetscount
- Front coveron / off
- Cover opening°
The top-bound spiral notepad family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this us letter top-bound spiral notepad yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.