Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-WINGED-RIGID-01Rigid
Winged rigid gift box dieline
A fixed lined tray, opening side wings, a rear hinged lid and a ribbon pull loop. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside240 × 160 × 60 mm
Outside252.6 × 172.6 × 74.7 mm
Flat blank281.3 × 606.1 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-WINGED-RIGID-01
- Inside size
- Tray length 240 · Tray depth 160 · Tray height 60 mm
- Size range
- Tray length 100–400 · Tray depth 80–300 · Tray height 25–120 mm
- Manufacturing
- 246 × 166 × 67 mm score to score · inside vs outside sizes
- Parts
- 15 parts — Rear case wrap and lid liner, Left wing wrap and liner, left side-spine board, left half-lid board, Right wing wrap and liner, right side-spine board, right half-lid board, Flexible left closure tab, Fixed tray wrap and inner walls, Tray floor liner, V-grooved fixed tray board, Case base board, Rear spine board, Full rear lid board, Supplied ribbon · cut-length guide
- Board area
- 0.743 m² · about 3 up on a 720 × 1020 mm sheet
- Default board
- Rigid greyboard 2 mm · 2 mm caliper
- Board options
- Rigid 2 mmRigid 1.5
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Kiss cut
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-WINGED-RIGID-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (2 mm for Rigid greyboard 2 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Case baseRear case wrap and lid liner | 252.6 × 172.6 | – |
| Rear spineRear case wrap and lid liner | 252.6 × 74.6 | – |
| Full lidRear case wrap and lid liner | 252.6 × 172.6 | – |
| Board-edge wrap ×4Rear case wrap and lid liner | 2.3 × 172.6 | – |
| Glued turn-in ×4Rear case wrap and lid liner | 12 × 168 | – |
| Board-edge wrap ×2Rear case wrap and lid liner | 2.3 × 74.6 | – |
| Glued turn-in ×2Rear case wrap and lid liner | 12 × 69.9 | – |
| Board-edge wrapRear case wrap and lid liner | 252.6 × 2.3 | – |
| Glued turn-inRear case wrap and lid liner | 248 × 12 | – |
| Free-edge wrapRear case wrap and lid liner | 246.6 × 2.3 | – |
| Inside linerRear case wrap and lid liner | 246.6 × 169.6 | – |
| Bond beneath the case baseLeft wing wrap and liner | 166 × 20 | – |
| Opening side spineLeft wing wrap and liner | 166 × 68.4 | – |
| Opening half lidLeft wing wrap and liner | 166 × 124.3 | – |
| Board-edge wrap ×2Left wing wrap and liner | 2.3 × 68.4 | – |
| Glued turn-in ×2Left wing wrap and liner | 12 × 63.8 | – |
50 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Ribbon widthmm
- Ribbon projectionmm
Ready-sized winged rigid gift box presets
The same structure with sizes, boards and options set for a use.
- Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this winged rigid gift box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.