Skip to content
DielineMaker
Start designing free
Cosmetic carton, Arthur lock tuck
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-ARTHUR-LOCK-TUCK-01Tuck end

Cosmetic carton, Arthur lock tuck dieline

Retail carton whose ends stay closed on a peg or in a bag. A ready-sized preset of the arthur lock tuck end — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside50 × 50 × 140 mm
Outside51.2 × 51.2 × 141.2 mm
Flat blank213.8 × 269.4 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-ARTHUR-LOCK-TUCK-01
Structure
Arthur lock tuck end
Inside size
Length 50 · Width 50 · Height 140 mm
Size range
Length 30–400 · Width 20–300 · Height 40–500 mm
Manufacturing
50.6 × 50.6 × 140.6 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.042 m²
Default board
Folding boxboard 400 g · 0.6 mm caliper
Board options
SBS 350SBS 300FBB 400GD2 350Kraft 350Black 350SBS 18 pt
Good for
cosmeticsskincareretailarthur lockarthur lock tucklocking dust flapshooked dust flapsscissor lockinterlocking dust flapsreverse tuck

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Cosmetic carton, Arthur lock tuck flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 50 × 50 × 140 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

8 per sheet · Carton
8 copies of Carton on the stock sheet

Not proven optimal: upper bound 16 ups, within 8 ups (50.0 %).

Open in editor with this sheet

How it folds

The cosmetic carton, arthur lock tuck erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap
  2. 2
    Fold the dust flaps inHooked locking dust flap and 3 more
  3. 3
    Tuck the flaps inTop tuck, Bottom tuck
  4. 4
    Close the end flapsTop closure, Bottom closure
FrontLeft · 1Back · 1Right · 1Top · 4Top tuck · 3Bottom · 4
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-ARTHUR-LOCK-TUCK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.6 mm for Folding boxboard 400 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front50.6 × 140.6– × H + T
Left side50.6 × 140.6– × H + T
Back50.6 × 140.6– × H + T
Right side50 × 140.6– × H + T
Glue flap12 × 140.6– × H + T
Top closure50.6 × 49.4–
Top tuck49.4 × 15–
Hooked locking dust flap ×250.6 × 30.4–
Hooked locking dust flap ×250 × 30.4–
Bottom closure50.6 × 49.4–
Bottom tuck49.4 × 15–

Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

  • Tuck depthmm
  • Slit lockon / off
  • Thumb notchon / off
  • Notch radiusmm
  • Locking dust flap depthmm

The arthur lock tuck end family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the cosmetic carton, arthur lock tuck dieline fit my product?

Retail carton whose ends stay closed on a peg or in a bag. The default dimensions in inside-size mode are Length 50 mm, Width 50 mm, Height 140 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 30–400 mm, Width 20–300 mm, Height 40–500 mm. At the default settings, the editor also exposes Tuck depth, Slit lock, Thumb notch, Notch radius, Locking dust flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Folding boxboard 400 g (0.6 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Grey-back duplex 350 g, Kraft board 350 g, Black-core board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this cosmetic carton, arthur lock tuck yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.