Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-BARRIER-BANNER-01Display
Crowd-control barrier banner dieline
A printed banner on a crowd-control barrier, mesh site fence or café barrier. Tied versions print the sheet with punched eyelets; the café version slips its top sleeve over the rail. Barrier frames are generic presentation hardware. A ready-sized preset of the barrier banner — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside2200 × 800 mm
Outside2200 × 800 mm
Flat blank2200 × 800 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-BARRIER-BANNER-01
- Inside size
- Banner width 2200 · Banner height 800 mm
- Size range
- Banner width 800–3600 · Banner height 400–2000 mm
- Manufacturing
- 2200 × 800 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 1.760 m²
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Barrier3 options
- Eyelet spacingmm
The barrier banner family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this crowd-control barrier banner yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.