Preset
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Bell gift box dieline
A bell-shaped tray and lift-off lid: a domed crown, a waist that flares out to the lip and a straight mouth, with rolled walls and scored lip corners. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-BELL-GIFT-BOX-01
- Inside size
- Width at the lip 140 · Height of the bell 160 · Depth 40 mm
- Size range
- Width at the lip 70–350 · Height of the bell 70–350 · Depth 20–100 mm
- Manufacturing
- 140.5 × 160.5 × 40.5 mm score to score · inside vs outside sizes
- Parts
- 4 parts — Lid cap, Base wall strip, Base cap, Lid wall strip
- Board area
- 0.065 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 140 × 160 × 40 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Not proven optimal: upper bound 43 ups, within 7 ups (16.3 %).
How it folds
The bell gift box erects in 2 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the glue flap and glue the seamCap bonding tab and 151 more
- 2Fold the stripBase wall, Lid wall and 2 more
How the blank is sized
Score-to-score panel sizes of this DM-BELL-GIFT-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Gift box lidLid cap | 146.8 × 163.2 | – |
| Base wall ×14Base wall strip | 6.8 × 40.5 | – × H + T |
| Cap bonding tab ×14Base wall strip | 6.8 × 7 | – |
| Base wall ×6Base wall strip | 6.8 × 40.5 | – |
| Cap bonding tab ×6Base wall strip | 6.8 × 7 | – |
| Base wall ×2Base wall strip | 6.8 × 40.5 | – × H + T |
| Cap bonding tab ×2Base wall strip | 6.8 × 7 | – |
| Base wall ×2Base wall strip | 6.8 × 40.5 | – × H + T |
| Cap bonding tab ×2Base wall strip | 6.8 × 7 | – |
| Base wall ×14Base wall strip | 6.8 × 40.5 | – × H + T |
| Cap bonding tab ×14Base wall strip | 6.8 × 7 | – |
| Base wall ×16Base wall strip | 6.8 × 40.5 | – |
| Cap bonding tab ×16Base wall strip | 6.8 × 7 | – |
| Base wall ×2Base wall strip | 7.3 × 40.5 | – × H + T |
| Cap bonding tab ×2Base wall strip | 7.3 × 2.4 | – |
| Base wall ×2Base wall strip | 7.5 × 40.5 | – |
48 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Waist width%
- Lid depthmm
Ready-sized bell gift box presets
The same structure with sizes, boards and options set for a use.
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the bell gift box dieline fit my product?
A bell-shaped tray and lift-off lid: a domed crown, a waist that flares out to the lip and a straight mouth, with rolled walls and scored lip corners. The default dimensions in inside-size mode are Width at the lip 140 mm, Height of the bell 160 mm, Depth 40 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Width at the lip 70–350 mm, Height of the bell 70–350 mm, Depth 20–100 mm. At the default settings, the editor also exposes Waist width, Lid depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this bell gift box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.





