Skip to content
DielineMaker
Start designing free
Wedding bell favour box
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-BELL-GIFT-BOX-01Shapes

Wedding bell favour box dieline

A bell-shaped tray and lift-off lid: a domed crown, a waist that flares out to the lip and a straight mouth, with rolled walls and scored lip corners. A ready-sized preset of the bell gift box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside85 × 100 × 28 mm
Outside91.7 × 103.2 × 29.3 mm
Flat blank326.4 × 32.8 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-BELL-GIFT-BOX-01
Structure
Bell gift box
Inside size
Width at the lip 85 · Height of the bell 100 · Depth 28 mm
Size range
Width at the lip 70–350 · Height of the bell 70–350 · Depth 20–100 mm
Manufacturing
85.5 × 100.5 × 28.5 mm score to score · inside vs outside sizes
Parts
4 parts — Lid cap, Base wall strip, Base cap, Lid wall strip
Board area
0.026 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350FBB 400Kraft 350Black 350SBS 18 pt
Good for
weddingfavourbridal showerbell boxbell shaped boxchristmas bell boxwedding bell boxjingle bell boxholiday gift boxshaped gift box

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Wedding bell favour box flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 85 × 100 × 28 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

90 per sheet · Lid cap
90 copies of Lid cap on the stock sheet

Not proven optimal: upper bound 105 ups, within 15 ups (14.3 %).

Open in editor with this sheet

How it folds

The wedding bell favour box erects in 2 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the glue flap and glue the seamCap bonding tab and 151 more
  2. 2
    Fold the stripBase wall, Lid wall and 2 more
TopBottom
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-BELL-GIFT-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Gift box lidLid cap91.7 × 103.2–
Base wall ×8Base wall strip4.2 × 28.5– × H + T
Cap bonding tab ×8Base wall strip4.2 × 4.3–
Base wall ×24Base wall strip4.2 × 28.5– × H + T
Cap bonding tab ×24Base wall strip4.2 × 4.3–
Base wall ×6Base wall strip4.2 × 28.5–
Cap bonding tab ×6Base wall strip4.2 × 4.3–
Base wall ×2Base wall strip4.2 × 28.5– × H + T
Cap bonding tab ×2Base wall strip4.2 × 4.3–
Base wall ×2Base wall strip4.2 × 28.5– × H + T
Cap bonding tab ×2Base wall strip4.2 × 4.3–
Base wall ×16Base wall strip4.2 × 28.5– × H + T
Cap bonding tab ×16Base wall strip4.2 × 4.3–
Base wall ×14Base wall strip4.2 × 28.5–
Cap bonding tab ×14Base wall strip4.2 × 4.3–
Base wall ×2Base wall strip4.7 × 28.5– × H + T

48 more panels are listed in the editor’s structure step.

Adjustable in the editor

Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.

  • Waist width%
  • Lid depthmm

The bell gift box family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the wedding bell favour box dieline fit my product?

A bell-shaped tray and lift-off lid: a domed crown, a waist that flares out to the lip and a straight mouth, with rolled walls and scored lip corners. The default dimensions in inside-size mode are Width at the lip 85 mm, Height of the bell 100 mm, Depth 28 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Width at the lip 70–350 mm, Height of the bell 70–350 mm, Depth 20–100 mm. At the default settings, the editor also exposes Waist width, Lid depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All shapes templates

Make this wedding bell favour box yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.