Skip to content
DielineMaker
Start designing free
Loose tea carton, bellows tuck
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-BELLOWS-TUCK-01Tuck end

Loose tea carton, bellows tuck dieline

Gusseted ends keep loose tea or spice in the carton. A ready-sized preset of the bellows tuck carton — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside75 × 50 × 130 mm
Outside76 × 51 × 131 mm
Flat blank263.5 × 261.5 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-BELLOWS-TUCK-01
Structure
Bellows tuck carton
Inside size
Length 75 · Width 50 · Height 130 mm
Size range
Length 45–400 · Width 20–200 · Height 40–500 mm
Manufacturing
75.5 × 50.5 × 130.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.051 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350SBS 300FBB 400GD2 350Kraft 350Black 350SBS 18 pt
Good for
loose teaspicepowderfoodbellows tuckgusset tuckgusseted tuckwebbed tucktongue lockstraight tuck

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Reverse crease
  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Loose tea carton, bellows tuck flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 75 × 50 × 130 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

9 per sheet · Carton
9 copies of Carton on the stock sheet

Not proven optimal: upper bound 13 ups, within 4 ups (30.8 %).

Open in editor with this sheet

How it folds

The loose tea carton, bellows tuck erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap
  2. 2
    Fold the gussetsbottom webbed cover, bottom webbed tuck, Connected side wing, Diagonal return wing, top webbed cover and 7 more
  3. 3
    Lock the tabsTongue lock and 1 more
FrontLeft · 1Back · 1Right · 1Bottom · 2Top · 2
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-BELLOWS-TUCK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front75.5 × 130.5L + T × H + T
Left side50.5 × 130.5W + T × H + T
Back75.5 × 130.5L + T × H + T
Right side50 × 130.5W × H + T
Glue flap12 × 130.5– × H + T
bottom webbed cover75.5 × 50.5L + T × W + T
bottom webbed tuck74.5 × 15L − T × –
Connected side wing ×250.5 × 29W + T × –
Diagonal return wing ×241.1 × 35.7–
Connected side wing ×250 × 28.9W × –
Diagonal return wing ×240.8 × 35.7–
top webbed cover75.5 × 50.5L + T × W + T
top webbed tuck74.5 × 15L − T × –
Tongue lock ×222.7 × 23.8–

Adjustable in the editor

Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.

  • Tuck depthmm
  • Tongue widthmm
  • Tongue heightmm

The bellows tuck carton family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the loose tea carton, bellows tuck dieline fit my product?

Gusseted ends keep loose tea or spice in the carton. The default dimensions in inside-size mode are Length 75 mm, Width 50 mm, Height 130 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 45–400 mm, Width 20–200 mm, Height 40–500 mm. At the default settings, the editor also exposes Tuck depth, Tongue width, Tongue height. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Grey-back duplex 350 g, Kraft board 350 g, Black-core board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this loose tea carton, bellows tuck yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.