Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-FIN-SEALED-BRICK-01Food
Juice box (brick carton) dieline
The aseptic drink brick: flat top and base sealed in a fin that folds flat, with the corners pressed out into double-ply ears that fold down the sides and under the base. Lay out the printed decor here; aseptic fillers form and seal it from reel stock. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside46 × 37 × 118 mm
Outside46.9 × 37.9 × 118.9 mm
Flat blank179.8 × 167.1 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-FIN-SEALED-BRICK-01
- Inside size
- Length 46 · Width 37 · Height 118 mm
- Size range
- Length 30–150 · Width 25–100 · Height 60–300 mm
- Manufacturing
- 46.5 × 37.5 × 118.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.029 m² · about 20 up on a 720 × 1020 mm sheet
- Default board
- Food SBS, PE-coated 300 g · 0.45 mm caliper
- Board options
- Food SBS PESBS 300Food kraft PESBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-FIN-SEALED-BRICK-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.45 mm for Food SBS, PE-coated 300 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 46.5 × 118.5 | L + T × H + T |
| Left side | 37.5 × 118.5 | W + T × H + T |
| Back | 46.5 × 118.5 | L + T × H + T |
| Right side | 37 × 118.5 | W × H + T |
| Glue flap | 12 × 118.5 | – × H + T |
| Bottom (front half) | 46.5 × 18.7 | L + T × – |
| Bottom fin | 46.5 × 5.6 | L + T × – |
| Bottom (back half) | 46.5 × 18.7 | L + T × – |
| Bottom ear fold | 26.5 × 13.2 | – |
| Bottom ear fold ×3 | 13.2 × 26.5 | – |
| Bottom ear fin ×3 | 18.7 × 5.6 | – |
| Bottom ear fin | 18.7 × 5.6 | – |
| Top (front half) | 46.5 × 18.7 | L + T × – |
| Top fin | 46.5 × 5.6 | L + T × – |
| Top (back half) | 46.5 × 18.7 | L + T × – |
| Top ear | 37.5 × 18.7 | W + T × – |
5 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Fin heightmm
Ready-sized juice box (brick carton) presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this juice box (brick carton) yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.