Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0205Shipping
Centre special overlap box dieline
Every flap is cut to half the length, so the inner flaps meet in the middle for a flat, closed floor and the outer flaps overlap by the length minus the width — two layers to staple or tape through. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside400 × 250 × 250 mm
Outside406.4 × 256.4 × 269.2 mm
Flat blank1341.6 × 666 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0205
- Inside size
- Length 400 · Width 250 · Height 250 mm
- Size range
- Length 80–1200 · Width 60–1000 · Height 40–1200 mm
- Manufacturing
- 403.2 × 253.2 × 262.8 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.872 m²
- Default board
- B-flute shipping · 3.2 mm caliper
- Board options
- B-fluteEB doubleE-flute KE-flute WF-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0205 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (3.2 mm for B-flute shipping). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 403.2 × 262.8 | L + T × H + 4T |
| Left side | 253.2 × 262.8 | W + T × H + 4T |
| Back | 403.2 × 262.8 | L + T × H + 4T |
| Right side | 250 × 262.8 | W × H + 4T |
| Glue flap | 32 × 262.8 | – |
| Bottom outer flap | 400 × 201.6 | L × – |
| Bottom inner flap ×2 | 246.8 × 201.6 | – |
| Bottom outer flap | 396.8 × 201.6 | L − T × – |
| Top outer flap | 400 × 201.6 | L × – |
| Top inner flap ×2 | 246.8 × 201.6 | – |
| Top outer flap | 396.8 × 201.6 | L − T × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Hand holeson / off
Ready-sized centre special overlap box presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this centre special overlap box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.