Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DDOOR-CHAMFER-01Shipping
Shallow chamfered double door dieline
Shallow lean for a near-square section. A ready-sized preset of the chamfered double-door tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 300 × 64 mm
Outside203.2 × 303.2 × 65.6 mm
Flat blank550.6 × 552.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DDOOR-CHAMFER-01
- Inside size
- Width (both doors) 200 · Length 300 · Height 64 mm
- Size range
- Width (both doors) 80–600 · Length 80–800 · Height 30–250 mm
- Manufacturing
- 200 × 300 × 64 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.217 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-DDOOR-CHAMFER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 200 × 300 | L × W |
| Right wall | 32 × 300 | – × W |
| Chamfer face ×2 | 37 × 300 | – × W |
| Right door | 80.7 × 300 | – × W |
| Centre lip ×2 | 25.6 × 296.8 | – × W − 2T |
| End ear ×4 | 32 × 40 | – |
| End ear ×4 | 37 × 37 | – |
| Left wall | 32 × 300 | – × W |
| Left door | 80.7 × 300 | – × W |
| Back end | 200 × 64 | L × H |
| End fold-over ×2 | 163 × 62.4 | – × H − T |
| Front end | 200 × 64 | L × H |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Chamfer lean°
- Chamfer face widthmm
- Centre lipmm
The chamfered double-door tray family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this shallow chamfered double door yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.