Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-CONE-LOCK-TOP-01Food
Flat-bottom cone carton with locking top dieline
A faceted cone with integral petal flaps that fold over the mouth and lock with a tongue through a slot. Pointed or flat-bottomed; one blank with a glued seam. A ready-sized preset of the conical food carton with locking top — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 120 × 130 mm
OutsideØ 120 × 130 mm
Flat blank347.9 × 285.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-CONE-LOCK-TOP-01
- Inside size
- Mouth diameter 120 · Height 130 mm
- Size range
- Mouth diameter 50–250 · Height 50–350 mm
- Manufacturing
- Ø 120 × 130 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.054 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Food kraft PEKraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Facetscount
- Bottom diametermm
- Integral baseon / off
- Tongue depthmm
- Seam tabmm
The conical food carton with locking top family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this flat-bottom cone carton with locking top yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.