Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-CONE-LOCK-TOP-01Food
Conical food carton with locking top dieline
A faceted cone with integral petal flaps that fold over the mouth and lock with a tongue through a slot. Pointed or flat-bottomed; one blank with a glued seam. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 110 × 160 mm
OutsideØ 110 × 160 mm
Flat blank245.3 × 255.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-CONE-LOCK-TOP-01
- Inside size
- Mouth diameter 110 · Height 160 mm
- Size range
- Mouth diameter 50–250 · Height 50–350 mm
- Manufacturing
- Ø 110 × 160 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.037 m² · about 12 up on a 720 × 1020 mm sheet
- Default board
- Food kraft, PE-lined 320 g · 0.5 mm caliper
- Board options
- Food kraft PEKraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Facetscount
- Bottom diametermm
- Integral baseon / off
- Tongue depthmm
- Seam tabmm
Ready-sized conical food carton with locking top presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this conical food carton with locking top yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.