Skip to content
DielineMaker
Start designing free
Halo-lit 3D logo and letter sign
Preview image

A 3D product preview with editable artwork placement. The downloads contain artwork areas; manufacturing patterns and hardware drawings are not included. The artwork is a sample from a fictional brand — swap in your own in the editor.

Halo-lit 3D logo and letter sign decoration template

Reverse-lit letters for a 1500 × 350 mm logo layout, with opaque 50 mm bodies and a 35 mm gap creating a warm wall halo. Change the lettering, approved contours, finish and light state. Export face and back-plate references, nominal return lengths and placement. LED layout, diffuser, wiring, mounting and structural engineering are supplied separately. A ready-sized preset of the channel letters and 3d logo sign — adjust the object dimensions and decoration area to preview your artwork at size.

Object size1500 × 350 mm
Artwork area1500 × 350 mm
Download the artwork templatePro
Artwork boundary preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, with the artwork area and bleed, without a watermark. See plans

Reference
DM-LETTERS-04
Structure
Channel letters and 3D logo sign
Object size
Layout width 1500 · Layout height 350 mm
Size range
Layout width 300–6000 · Layout height 100–2000 mm
Parts
41 parts — Full-size letter placement reference, Letter / contour 1 face, Contour 1 back-plate reference, Contour 1 outer return · nominal perimeter, no joins, Letter / contour 2 face, Contour 2 back-plate reference, Contour 2 outer return · nominal perimeter, no joins, Contour 2 counter return · nominal perimeter, no joins, Letter / contour 3 face, Contour 3 back-plate reference, Contour 3 outer return · nominal perimeter, no joins, Contour 3 counter return · nominal perimeter, no joins, Letter / contour 4 face, Contour 4 back-plate reference, Contour 4 outer return · nominal perimeter, no joins, Letter / contour 5 face, Contour 5 back-plate reference, Contour 5 outer return · nominal perimeter, no joins, Letter / contour 6 face, Contour 6 back-plate reference, Contour 6 outer return · nominal perimeter, no joins, Letter / contour 7 face, Contour 7 back-plate reference, Contour 7 outer return · nominal perimeter, no joins, Letter / contour 8 face, Contour 8 back-plate reference, Contour 8 outer return · nominal perimeter, no joins, Letter / contour 9 face, Contour 9 back-plate reference, Contour 9 outer return · nominal perimeter, no joins, Letter / contour 10 face, Contour 10 back-plate reference, Contour 10 outer return · nominal perimeter, no joins, Contour 10 counter return · nominal perimeter, no joins, Contour 10 counter return · nominal perimeter, no joins, Letter / contour 11 face, Contour 11 back-plate reference, Contour 11 outer return · nominal perimeter, no joins, Letter / contour 12 face, Contour 12 back-plate reference, Contour 12 outer return · nominal perimeter, no joins
Artwork area
1.068 m²
Good for
channel letter sign mockup3d logo sign mockuphalo lit logo signacrylic letter signcut letter sign templatereception signshopfront letters

The flat artwork area

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed.

  • Artwork boundary
  • Bleed 3 mm
Halo-lit 3D logo and letter sign artwork boundary

Adjustable in the editor

Alongside dimensions, the template offers 10 options; the template and 3D preview follow each change.

  • Construction4 options
  • Sign letteringeditable text
  • Letter / plaque depthmm
  • Wall standoffmm
  • Lights onon / off
  • Halo colour3 options
  • Face / tube colour5 options
  • Returns / edges5 options
  • Surface finish3 options
  • Show wall contexton / off

The channel letters and 3d logo sign family

The same model with sizes and artwork options ready to customize.

Inspired by real signage and retail projects

See where an idea can go.

Original concepts inspired by real signage and retail projects, with fictional brands and native templates you can open and customize.

Generated YUGE & DASHI white front-lit ramen-bar channel letters with scarlet returns on charcoal tiles above separate window-vinyl copy
AI-generated creative concept · YUGE & DASHI
YUGE & DASHI

Light a ramen-bar name with white channel faces.

The job

  • Create a ramen-bar channel letter sign with editable lettering and return depth.

Choose your starting point

Start with the 1800 × 400 mm placement envelope and 80 mm channel depth. Change the sample lettering or paste approved SVG contours. Print the face and letter-placement references; nominal outer and counter return lengths exclude bend and join allowances. The sign supplier designs the casing, lighting, wiring and fixings. The window tagline is separate vinyl decoration.

Explore the actual templates

Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.

Generated PLIE PARLOUR glossy charcoal cut-acrylic letters and a flat painted tagline on a saffron-yellow dance-studio wall in daylight
AI-generated creative concept · PLIE PARLOUR
PLIE PARLOUR

Mark a dance studio with unlit acrylic letters.

The job

  • Make an unlit acrylic cut letter sign for a dance-studio entrance.

Choose your starting point

The unlit preset uses a 1200 × 250 mm placement envelope, 10 mm letters and a 15 mm wall gap. Letter proportions remain intact when the envelope changes. Export the face contours and placement reference; the supplier confirms actual acrylic, edge finish, adhesive or standoffs and installation. The smaller tagline is flat wall paint, separate from the acrylic letters.

Explore the actual templates

Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.

Generated STATIC FOLIO black ornamental record-shop plaque with gold lettering and groove graphics, illuminated only by a cool-white rear halo
AI-generated creative concept · STATIC FOLIO
STATIC FOLIO

Outline a record-shop plaque with a cool-white halo.

The job

  • Mock up a record-shop halo-lit contour plaque with custom face artwork.

Choose your starting point

Use the 900 × 400 mm layout with a 30 mm opaque plaque and 30 mm wall gap. The sample has an irregular ornamental lobed contour and cool-white rear halo; paste approved closed SVG contours for another perimeter. Edit the printable face wordmark separately. Face and placement references do not specify diffuser construction, LEDs, mounting or electrical work.

Explore the actual templates

Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.

Before you choose this template

Size, materials, downloads and production checks.

Will the halo-lit 3d logo and letter sign decoration template fit my product?

Reverse-lit letters for a 1500 × 350 mm logo layout, with opaque 50 mm bodies and a 35 mm gap creating a warm wall halo. Change the lettering, approved contours, finish and light state. Export face and back-plate references, nominal return lengths and placement. LED layout, diffuser, wiring, mounting and structural engineering are supplied separately. The default reference dimensions are Layout width 1500 mm, Layout height 350 mm. Match the artwork area to your supplier’s measured print area; the displayed object dimensions do not establish production tolerances.

Can I change the size and design?

Yes. The supported ranges are Layout width 300–6000 mm, Layout height 100–2000 mm. At the default settings, the editor also exposes Construction, Sign lettering, Letter / plaque depth, Wall standoff, Lights on, Halo colour and 4 more options. Add your own artwork and preview the result in 3D. Resizing changes the model and artwork reference areas.

Does this template specify the material for the product?

Exports are face contours, letter placement and selected back-plate / nominal return references. Return lengths exclude bend, join and trim allowances. These are not manufacturing dies; supplier-approved outlines, fixings, lighting, wiring and structural fabrication remain separate. Confirm the actual product material, print surface and finishing process with your supplier; a 3D appearance is not a manufacturing specification.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF artwork boundaries. Exports are face contours, letter placement and selected back-plate / nominal return references. Return lengths exclude bend, join and trim allowances. These are not manufacturing dies; supplier-approved outlines, fixings, lighting, wiring and structural fabrication remain separate.

Is this decoration template free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I manufacture the product from this download?

Exports are face contours, letter placement and selected back-plate / nominal return references. Return lengths exclude bend, join and trim allowances. These are not manufacturing dies; supplier-approved outlines, fixings, lighting, wiring and structural fabrication remain separate. Use the download to prepare and approve the printed components or decoration with your supplier.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All apparel & merchandise templates

Make this halo-lit 3d logo and letter sign yours

Set the artwork area, add your design and export the dimensioned artwork template, or stage the product in a 3D scene.