Skip to content
DielineMaker
Start designing free
Full flap auto bottom
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-FULL-FLAP-AUTO-01Tuck end

Full flap auto bottom dieline

A pre-glued bottom that sets itself as the flat carton is squared: glue tabs on the side flaps pull a full-depth inner flap across the whole floor and a half flap over it, under a tuck top. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside100 × 60 × 140 mm
Outside101 × 61 × 141 mm
Flat blank333.5 × 274.5 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-FULL-FLAP-AUTO-01
Inside size
Length 100 · Width 60 · Height 140 mm
Size range
Length 40–400 · Width 25–250 · Height 30–500 mm
Manufacturing
100.5 × 60.5 × 140.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.069 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350FBB 400GD2 350Kraft 350Black 350F-fluteE-flute WE-flute KSBS 18 pt
Good for
full flap auto bottomfull flap automatic bottomauto bottomautomatic bottompre-glued bottomcrash lockcovered bottomtuck topheavysift resistant

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Reverse crease
  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Full flap auto bottom flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 100 × 60 × 140 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

6 per sheet · Carton
6 copies of Carton on the stock sheet

Not proven optimal: upper bound 9 ups, within 3 ups (33.3 %).

Open in editor with this sheet

How it folds

The full flap auto bottom erects in 6 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap, Covering bottom flap
  2. 2
    Fold the flapsBottom side flap, Glue tab and 2 more
  3. 3
    Lock the tabsOuter bottom flap
  4. 4
    Fold the dust flaps inTop dust flap and 1 more
  5. 5
    Tuck the flaps inTop tuck
  6. 6
    Close the end flapsTop closure
FrontLeft · 1Back · 1Right · 1Top · 6Bottom · 3Bottom · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-FULL-FLAP-AUTO-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front100.5 × 140.5L + T × H + T
Left side60.5 × 140.5W + T × H + T
Back100.5 × 140.5L + T × H + T
Right side60 × 140.5W × H + T
Glue flap12 × 140.5– × H + T
Top closure100.5 × 59.5L + T × W − T
Top tuck99.5 × 15L − T × –
Top dust flap60.5 × 37.5W + T × –
Top dust flap60 × 37.5W × –
Outer bottom flap100.5 × 30.3L + T × –
Covering bottom flap100.5 × 59.5L + T × W − T
Bottom side flap60.5 × 30W + T × –
Glue tab ×242.4 × 20.8–
Bottom side flap60 × 30W × –

Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

  • Tuck depthmm
  • Slit lockon / off
  • Thumb notchon / off
  • Notch radiusmm
  • Side flap depthmm

Ready-sized full flap auto bottom presets

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the full flap auto bottom dieline fit my product?

A pre-glued bottom that sets itself as the flat carton is squared: glue tabs on the side flaps pull a full-depth inner flap across the whole floor and a half flap over it, under a tuck top. The default dimensions in inside-size mode are Length 100 mm, Width 60 mm, Height 140 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 40–400 mm, Width 25–250 mm, Height 30–500 mm. At the default settings, the editor also exposes Tuck depth, Slit lock, Thumb notch, Notch radius, Side flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Grey-back duplex 350 g, Kraft board 350 g, Black-core board 350 g, F-flute micro corrugated, E-flute white / kraft, E-flute kraft / kraft, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this full flap auto bottom yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.