Skip to content
DielineMaker
Start designing free
Powder carton, full flap auto bottom
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-FULL-FLAP-AUTO-01Tuck end

Powder carton, full flap auto bottom dieline

Carton for a bagged powder or granules, with a closed full-depth floor. A ready-sized preset of the full flap auto bottom — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside140 × 70 × 180 mm
Outside141 × 71 × 181 mm
Flat blank433.4 × 334.5 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-FULL-FLAP-AUTO-01
Structure
Full flap auto bottom
Inside size
Length 140 · Width 70 · Height 180 mm
Size range
Length 40–400 · Width 25–250 · Height 30–500 mm
Manufacturing
140.5 × 70.5 × 180.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.113 m²
Default board
Grey-back duplex 350 g · 0.48 mm caliper
Board options
SBS 350FBB 400GD2 350Kraft 350Black 350F-fluteE-flute WE-flute KSBS 18 pt
Good for
powderdetergentgranuleshouseholdfull flap auto bottomfull flap automatic bottomauto bottomautomatic bottompre-glued bottomcrash lock

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Reverse crease
  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Powder carton, full flap auto bottom flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 140 × 70 × 180 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

4 per sheet · Carton
4 copies of Carton on the stock sheet

Not proven optimal: upper bound 6 ups, within 2 ups (33.3 %).

Open in editor with this sheet

How it folds

The powder carton, full flap auto bottom erects in 6 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap, Covering bottom flap
  2. 2
    Fold the flapsBottom side flap, Glue tab and 2 more
  3. 3
    Lock the tabsOuter bottom flap
  4. 4
    Fold the dust flaps inTop dust flap and 1 more
  5. 5
    Tuck the flaps inTop tuck
  6. 6
    Close the end flapsTop closure
FrontLeft · 1Back · 1Right · 1Top · 6Bottom · 3Bottom · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-FULL-FLAP-AUTO-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.48 mm for Grey-back duplex 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front140.5 × 180.5L + T × H + T
Left side70.5 × 180.5W + T × H + T
Back140.5 × 180.5L + T × H + T
Right side70 × 180.5W × H + T
Glue flap12 × 180.5– × H + T
Top closure140.5 × 69.5L + T × W − T
Top tuck139.5 × 15L − T × –
Top dust flap70.5 × 42.5W + T × –
Top dust flap70 × 42.5W × –
Outer bottom flap140.5 × 35.2L + T × –
Covering bottom flap140.5 × 69.5L + T × W − T
Bottom side flap70.5 × 35W + T × –
Glue tab ×249.5 × 24.3–
Bottom side flap70 × 35W × –

Adjustable in the editor

Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.

  • Tuck depthmm
  • Slit lockon / off
  • Thumb notchon / off
  • Notch radiusmm
  • Side flap depthmm

The full flap auto bottom family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the powder carton, full flap auto bottom dieline fit my product?

Carton for a bagged powder or granules, with a closed full-depth floor. The default dimensions in inside-size mode are Length 140 mm, Width 70 mm, Height 180 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 40–400 mm, Width 25–250 mm, Height 30–500 mm. At the default settings, the editor also exposes Tuck depth, Slit lock, Thumb notch, Notch radius, Side flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Grey-back duplex 350 g (0.48 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Grey-back duplex 350 g, Kraft board 350 g, Black-core board 350 g, F-flute micro corrugated, E-flute white / kraft, E-flute kraft / kraft, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this powder carton, full flap auto bottom yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.