Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TEATIN-01Labels
Tea tin with lid handle dieline
A round tea tin with a deep slip lid and an arched handle on the lid: wire bail or flat strap. Print the body wrap and the lid band. A parametric template — change its size and the cut outline, bleed and safe area are redrawn to match.
InsideØ 90 × 120 mm
OutsideØ 90 × 120 mm
Flat blank282.7 × 87.6 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TEATIN-01
- Inside size
- Diameter 90 · Body height 120 mm
- Size range
- Diameter 50–200 · Body height 50–250 mm
- Manufacturing
- Ø 90 × 120 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Body wrap (below the lid), Lid band
- Board area
- 0.031 m² · about 21 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Handle2 options
- Print the lid bandon / off
- Print the lid topon / off
- Lid off (beside)on / off
- Metal4 options
Ready-sized tea tin with lid handle presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tea tin with lid handle yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.