Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-LOCKING-GRIP-INSERT-01Trays & lids
Locking radial-grip insert dieline
A single blank with a floor, two side walls and overlapping aperture decks. Scored radial fingers fold into each opening, while struck side tongues engage the opposite deck aprons. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside240 × 80 × 45 mm
Outside240 × 81.8 × 46.8 mm
Flat blank240 × 404.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-LOCKING-GRIP-INSERT-01
- Inside size
- Insert length 240 · Insert width 80 · Lower deck height 45 mm
- Size range
- Insert length 80–600 · Insert width 40–300 · Lower deck height 15–160 mm
- Manufacturing
- 240 × 80 × 45 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.097 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- Folding boxboard 400 g · 0.6 mm caliper
- Board options
- FBB 400Kraft 350SBS 350F-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How it folds
The locking radial-grip insert erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upLocking side wall and 1 more
- 2Set the insertRadial aperture deck and 1 more
- 3Fold the walls upSlotted locking apron and 1 more
- 4Fold the flapsRadial grip finger, Struck locking tongue and 74 more
How the blank is sized
Score-to-score panel sizes of this DM-LOCKING-GRIP-INSERT-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.6 mm for Folding boxboard 400 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Insert floor | 240 × 80 | L × W |
| Locking side wall | 240 × 45 | L × H |
| Radial aperture deck ×2 | 240 × 80 | L × W |
| Slotted locking apron | 240 × 36 | L × – |
| Radial grip finger ×29 | 7.7 × 12.4 | – |
| Radial grip finger ×43 | 12.4 × 7.7 | – |
| Struck locking tongue ×4 | 18 × 9.9 | – |
| Locking side wall | 240 × 46.2 | L × H + 2T |
| Slotted locking apron | 240 × 37.2 | L × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Product openingscount
- Aperture outer diametermm
- Radial finger depthmm
- Fingers per openingcount
- Finger fold angle°
Ready-sized locking radial-grip insert presets
The same structure with sizes, boards and options set for a use.
- Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the locking radial-grip insert dieline fit my product?
A single blank with a floor, two side walls and overlapping aperture decks. Scored radial fingers fold into each opening, while struck side tongues engage the opposite deck aprons. The default dimensions in inside-size mode are Insert length 240 mm, Insert width 80 mm, Lower deck height 45 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Insert length 80–600 mm, Insert width 40–300 mm, Lower deck height 15–160 mm. At the default settings, the editor also exposes Product openings, Aperture outer diameter, Radial finger depth, Fingers per opening, Finger fold angle. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is Folding boxboard 400 g (0.6 mm caliper). This structure allows Folding boxboard 400 g, Kraft board 350 g, SBS white board 350 g, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this locking radial-grip insert yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.