Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureLabels
Large salad bowl 1300 ml dieline
A tapered paperboard wall, rolled paper rim and matching paper lid. The body artwork uses the true developed cone with its seam overlap; the lid disc is its print area. Base and lid forming allowances must come from the converter. A ready-sized preset of the paper soup & salad bowl — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 185 × 78 mm
OutsideØ 185 × 78 mm
Flat blank533.7 × 203.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Rim diameter 185 · Body height 78 mm
- Size range
- Rim diameter 95–230 · Body height 35–150 mm
- Manufacturing
- Ø 185 × 78 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Developed paper wall, Lid print disc
- Board area
- 0.068 m² · about 7 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 300 g · 0.42 mm caliper
- Board options
- SBS 300Paper 170Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Side seammm
- Cup construction3 options
- Paper handle2 options
- Base diametermm
- Paper lidon / off
The paper soup & salad bowl family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this large salad bowl 1300 ml yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.