Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureLabels
Paper ice cream pint dieline
A tapered paperboard wall, rolled paper rim and matching paper lid. The body artwork uses the true developed cone with its seam overlap; the lid disc is its print area. Base and lid forming allowances must come from the converter. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 97 × 104 mm
OutsideØ 97 × 104 mm
Flat blank306.2 × 136 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Rim diameter 97 · Body height 104 mm
- Size range
- Rim diameter 65–150 · Body height 35–150 mm
- Manufacturing
- Ø 97 × 104 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Developed paper wall, Lid print disc
- Board area
- 0.036 m² · about 16 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 300 g · 0.42 mm caliper
- Board options
- SBS 300Paper 170Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Side seammm
- Cup construction3 options
- Paper handle2 options
- Base diametermm
- Paper lidon / off
Ready-sized paper ice cream pint presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this paper ice cream pint yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.