Skip to content
DielineMaker
Start designing free
Cracker carton, partial overlap ends
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-PARTIAL-SEAL-END-01Tuck end

Cracker carton, partial overlap ends dieline

Grey-back carton for two sleeves of crackers. A ready-sized preset of the partial overlap seal end — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside150 × 55 × 200 mm
Outside151 × 56 × 201 mm
Flat blank423.4 × 271.5 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-PARTIAL-SEAL-END-01
Structure
Partial overlap seal end
Inside size
Length 150 · Width 55 · Height 200 mm
Size range
Length 20–400 · Width 12–200 · Height 20–500 mm
Manufacturing
150.5 × 55.5 × 200.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.111 m²
Default board
Grey-back duplex 350 g · 0.48 mm caliper
Board options
SBS 350SBS 300GD2 350FBB 400Kraft 350Black 350F-fluteSBS 18 pt
Good for
crackersbiscuitssnackfoodpartial overlap seal endpartial overlapseal endglued endglue endcereal box

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Cracker carton, partial overlap ends flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 150 × 55 × 200 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

4 per sheet · Carton
4 copies of Carton on the stock sheet

Not proven optimal: upper bound 6 ups, within 2 ups (33.3 %).

Open in editor with this sheet

How it folds

The cracker carton, partial overlap ends erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap
  2. 2
    Fold the dust flaps inDust flap and 3 more
  3. 3
    Fold the flapsInner seal flap and 1 more
  4. 4
    Close the end flapsTop seal flap, Bottom seal flap
FrontLeft · 1Back · 1Right · 1Inner seal flap · 3Top · 4Inner seal flap · 3Bottom · 4
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-PARTIAL-SEAL-END-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.48 mm for Grey-back duplex 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front150.5 × 200.5L + T × H + T
Left side55.5 × 200.5W + T × H + T
Back150.5 × 200.5L + T × H + T
Right side55 × 200.5W × H + T
Glue flap12 × 200.5– × H + T
Dust flap ×255.5 × 27W + T × –
Dust flap ×255 × 27W × –
Inner seal flap ×2150.5 × 35.5L + T × –
Top seal flap150.5 × 35.5L + T × –
Bottom seal flap150.5 × 35.5L + T × –

Adjustable in the editor

Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.

  • Top end2 options
  • Flap overlapmm
  • Dust flap depthmm

The partial overlap seal end family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the cracker carton, partial overlap ends dieline fit my product?

Grey-back carton for two sleeves of crackers. The default dimensions in inside-size mode are Length 150 mm, Width 55 mm, Height 200 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 20–400 mm, Width 12–200 mm, Height 20–500 mm. At the default settings, the editor also exposes Top end, Flap overlap, Dust flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Grey-back duplex 350 g (0.48 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Grey-back duplex 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this cracker carton, partial overlap ends yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.