Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-PLEATED-CAP-TRAY-01Trays & lids
Pleated-corner paper tray dieline
A rounded-square paper tray or cap whose corners rise on fans of narrow pleats from one uncut blank. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside160 × 160 × 25 mm
Outside160.8 × 160.8 × 25.8 mm
Flat blank221.2 × 221.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-PLEATED-CAP-TRAY-01
- Inside size
- Length 160 · Width 160 · Height 25 mm
- Size range
- Length 50–400 · Width 50–400 · Height 8–80 mm
- Manufacturing
- 160.4 × 160.4 × 25.4 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.041 m² · about 12 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 300 g · 0.42 mm caliper
- Board options
- SBS 300Paper 170Kraft 350SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-PLEATED-CAP-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.42 mm for SBS white board 300 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Floor | 171.2 × 171.2 | – |
| Corner facet ×14 | 8.4 × 25 | – × H |
| Corner facet ×10 | 25 × 8.4 | H × – |
| Side wall ×2 | 25 × 96 | H × – |
| Side wall ×2 | 96 × 25 | – × H |
| Corner pleat ×20 | 3.3 × 25 | – × H |
| Corner pleat ×8 | 1.6 × 25 | – × H |
| Corner pleat ×20 | 25 × 3.3 | – |
| Corner pleat ×8 | 25 × 1.6 | H × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Corner radiusmm
- Pleats per cornercount
Ready-sized pleated-corner paper tray presets
The same structure with sizes, boards and options set for a use.
- Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this pleated-corner paper tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.