Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Kraft pouch dieline
Natural kraft paper look. A ready-sized preset of the stand-up pouch — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside140 × 220 mm
Outside140 × 220 mm
Flat blank140 × 220 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Width 140 · Height 220 mm
- Size range
- Width 60–400 · Height 80–500 mm
- Manufacturing
- 140 × 220 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Front film, Back film, Bottom gusset
- Board area
- 0.073 m² · about 18 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- White PET/PEClear PET/PEMet PET/PEKraft/PELabel glossClear BOPPKraft 350Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 12 options; the template and 3D preview follow each change.
- Bottom construction3 options
- Gusset half-web (G)mm
- Side sealsmm
- Top sealmm
- Bottom seal at centremm
- Zipperon / off
- Zipper from topmm
- Tear notcheson / off
- Notch from topmm
- Hang / carry hole7 options
- Fill%
- Metallised filmon / off
The stand-up pouch family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this kraft pouch yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.