Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Sealed foil drink pouch dieline
Straight heat-sealed drink pouch with front, back and Doyen bottom-gusset webs in PET / aluminium foil / PE. Editable nominal 150–200 ml design starting points; confirm dimensions, capacity, seals and opening method with your pouch supplier before production. A parametric template — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside90 × 150 mm
Outside90 × 150 mm
Flat blank90 × 150 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Flat film width 90 · Flat film height 150 mm
- Size range
- Flat film width 70–180 · Flat film height 110–280 mm
- Manufacturing
- 90 × 150 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Front film, Back film, Bottom gusset
- Board area
- 0.032 m² · about 42 up on a 720 × 1020 mm sheet
- Default board
- PET / aluminium foil / PE laminate · 0.1 mm caliper
- Board options
- PET/AL/PE foil
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Gusset half-web (G)mm
- Side sealsmm
- Top sealmm
- Bottom seal at centremm
- Preview inflation%
Ready-sized sealed foil drink pouch presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this sealed foil drink pouch yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.