Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-RETENTION-SLEEVE-01Sleeves
Sleeve with curved end stops dieline
An open-ended sleeve closed by tongues through slits or glue, with punch-in retention tabs or curved end stops that hold the product in. A ready-sized preset of the locking retention sleeve — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 70 × 70 mm
Outside200.9 × 70.9 × 70.9 mm
Flat blank242 × 295 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-RETENTION-SLEEVE-01
- Inside size
- Length (open end to open end) 200 · Depth 70 · Height 70 mm
- Size range
- Length (open end to open end) 40–500 · Depth 15–300 · Height 15–300 mm
- Manufacturing
- 200.5 × 70.5 × 70.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.063 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- SBS 350Kraft 350FBB 400E-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-RETENTION-SLEEVE-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 200 × 70 | L × – |
| Top | 200 × 70 | L × – |
| End stop ×4 | 21 × 70 | – |
| Back | 200 × 70 | L × – |
| Bottom | 200 × 70 | L × – |
| Glue flap | 196 × 15 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Seam2 options
- Retention3 options
The locking retention sleeve family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this sleeve with curved end stops yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.