Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-ROUND-DOUBLE-DISPLAY-01Display
Round-headed counter double display dieline
Two tall round-headed panels on a narrow spine, opened into a V and tied at the foot to stand. A ready-sized preset of the round-headed double panel display — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 420 mm
Outside201 × 421 mm
Flat blank410 × 420 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-ROUND-DOUBLE-DISPLAY-01
- Inside size
- Panel width 200 · Panel height 420 mm
- Size range
- Panel width 60–600 · Panel height 100–1500 mm
- Manufacturing
- 200.5 × 420.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Double panel display, Foot tie strip
- Board area
- 0.168 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400E-flute WKraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-ROUND-DOUBLE-DISPLAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Left panelDouble panel display | 200 × 420 | L × H |
| SpineDouble panel display | 10 × 320.5 | – |
| Right panelDouble panel display | 200 × 320.5 | L × – |
| Tie stripFoot tie strip | 265.2 × 20 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Spine widthmm
- Opening angle°
The round-headed double panel display family
The same structure with sizes, boards and options set for a use.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this round-headed counter double display yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.