Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Mini cake scarf sleeve dieline
Wide kraft arch on a base for a mini cake, tart or brownie, tied with a ribbon. A ready-sized preset of the scarf sleeve (arch dessert sleeve) — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside90 × 80 × 45 mm
Outside90.9 × 80 × 45.5 mm
Flat blank116 × 348.6 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Arch width (inside) 90 · Depth 80 · Leg height 45 mm
- Size range
- Arch width (inside) 25–250 · Depth 15–200 · Leg height 5–250 mm
- Manufacturing
- 90.5 × 80 × 45.2 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.031 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- SBS 350SBS 300FBB 400Kraft 350Food SBS PEBlack 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Left leg | 80 × 45 | W × H |
| Crown ×15 | 80 × 8.9 | W × – |
| Crown | 80 × 8.9 | W × π·(L+T)/2 ÷ 16 |
| Right leg | 80 × 45 | W × H |
| Base | 80 × 89.7 | W × L |
| Front lip | 18 × 87.8 | L − 2T × Lip |
| Back lip | 18 × 87.8 | L − 2T × Lip |
| Tuck foot | 78.1 × 27 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 8 options; the template and 3D preview follow each change.
- Base2 options
- Ends3 options
- End lip heightmm
- Ribbon scarf3 options
- Ribbon widthmm
- Ribbon slit spacingmm
- Foot depthmm
- Foot closure2 options
The scarf sleeve (arch dessert sleeve) family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this mini cake scarf sleeve yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.