Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Burger clamshell dieline
A one-piece hinged burger box: tapered base and lid trays with glued corners, closed by a barbed tab through a slit in the front. The food-contact inside stays unprinted. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside110 × 110 × 75 mm
Outside110.9 × 110.9 × 75.9 mm
Flat blank181.3 × 362.7 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 110 · Width 110 · Height 75 mm
- Size range
- Length 60–260 · Width 60–220 · Height 36–150 mm
- Manufacturing
- 110.5 × 110.5 × 75.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.056 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- Food SBS, PE-coated 300 g · 0.45 mm caliper
- Board options
- Food SBS PEFood kraft PESBS 350Kraft 350SBS 300F-fluteE-flute KE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Wall taper°
- Lid depthmm
- Closure3 options
- Tongue widthmm
- Slit depthmm
- Vents per sidecount
- Lid windowon / off
Ready-sized burger clamshell presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this burger clamshell yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.