Skip to content
DielineMaker
Start designing free
Six-corner Beers tray
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-BEERS-6C-TRAY-01Trays & lids

Six-corner Beers tray dieline

The pre-glued donut and bakery box: a four-corner glued tray and a hinged telescoping cover glued at two more corners, collapse scores so it ships flat, and an anchor or spear lock into the front. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside254 × 178 × 64 mm
Outside258 × 179.5 × 64.8 mm
Flat blank385.5 × 550 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-BEERS-6C-TRAY-01
Inside size
Inside length 254 · Inside width 178 · Inside height 64 mm
Size range
Inside length 80–600 · Inside width 60–450 · Inside height 20–150 mm
Manufacturing
255.5 × 178.5 × 64.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.207 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350SBS 300FBB 400Kraft 350GD2 350Food SBS PEFood kraft PESBS 18 pt
Good for
beers traysix corner traydonut boxdoughnut boxbakery boxpie boxpre-glued trayships flatcollapsible trayhinged cover

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Six-corner Beers tray flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 254 × 178 × 64 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

1 per sheet · Tray with cover
1 copies of Tray with cover on the stock sheet

Proven optimal: no layout fits more than 1 ups on this sheet.

Open in editor with this sheet

How it folds

The six-corner beers tray erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upFront panel, Rear panel, Cover tuck flap
  2. 2
    Fold the corner ears inGlue flap, Cover glue flap and 4 more
  3. 3
    Fold the walls upEnd panel, Cover end panel and 2 more
  4. 4
    Close the lidCover panel
BottomFront · 1Back · 1Left · 3Right · 3Top · 4Front · 1Left · 3Right · 3
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-BEERS-6C-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Bottom panel255.5 × 178.5L + 3T × W + T
Front panel255.5 × 64L + 3T × H
Rear panel255.5 × 64.5L + 3T × H + T
End panel ×264 × 178.5W + T × H
Glue flap ×460.8 × 61.5–
Cover panel255.5 × 179L + 7T × W + 2T
Cover tuck flap257.5 × 64L + 7T × cover depth
Cover end panel ×264 × 179H × W + 2T
Cover glue flap ×260.8 × 61.5–

Adjustable in the editor

Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.

  • Cover lock3 options
  • Cover depthmm
  • Cover windowon / off

Ready-sized six-corner beers tray presets

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the six-corner beers tray dieline fit my product?

The pre-glued donut and bakery box: a four-corner glued tray and a hinged telescoping cover glued at two more corners, collapse scores so it ships flat, and an anchor or spear lock into the front. The default dimensions in inside-size mode are Inside length 254 mm, Inside width 178 mm, Inside height 64 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Inside length 80–600 mm, Inside width 60–450 mm, Inside height 20–150 mm. At the default settings, the editor also exposes Cover lock, Cover depth, Cover window. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Kraft board 350 g, Grey-back duplex 350 g, Food SBS, PE-coated 300 g, Food kraft, PE-lined 320 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All trays & lids templates

Make this six-corner beers tray yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.