Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F20.60.00.00Trays & lids
Collapsible tray and cover dieline
Base tray and hinged cover tray from one strip; each tray is glued at its two front corners so it folds flat and pops up. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside220 × 120 × 60 mm
Outside223 × 122 × 60.5 mm
Flat blank340.5 × 421 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F20.60.00.00
- Inside size
- Length (A) 220 · Depth (B) 120 · Height 60 mm
- Size range
- Length (A) 60–600 · Depth (B) 40–400 · Height 15–200 mm
- Manufacturing
- 220.5 × 120.5 × 60 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.143 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350E-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F20.60.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 220.5 × 120.5 | L + T × W + T |
| Front wall | 220.5 × 60 | L + T × H |
| Back wall | 220.5 × 60 | L + T × H |
| Cover top | 220.5 × 120.5 | L + T × W + T |
| Cover front wall | 220.5 × 60 | L + T × H |
| Left end wall | 60 × 120.5 | H × W + T |
| Cover left end | 60 × 120.5 | H × W + T |
| Corner flap (glued) ×2 | 59.8 × 60 | – × H |
| Corner flap ×2 | 59.8 × 60 | – × H |
| Cover corner flap (glued) ×2 | 59.8 × 60 | – × H |
| Right end wall | 60 × 120.5 | H × W + T |
| Cover right end | 60 × 120.5 | H × W + T |
Ready-sized collapsible tray and cover presets
The same structure with sizes, boards and options set for a use.
- Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this collapsible tray and cover yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.