Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-GRAVITY-DISPENSER-01Display
Sloped-top gravity-feed dispenser dieline
A tall dispenser carton with a sloping roof, an internal ramp and a low front mouth with a retaining lip. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 100 × 260 mm
Outside121 × 101 × 261 mm
Flat blank455 × 515.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-GRAVITY-DISPENSER-01
- Inside size
- Width 120 · Depth 100 · Back height 260 mm
- Size range
- Width 50–400 · Depth 40–300 · Back height 100–600 mm
- Manufacturing
- 120.5 × 100.5 × 260.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Gravity dispenser, Feed ramp
- Board area
- 0.143 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350E-flute WF-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-GRAVITY-DISPENSER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BackGravity dispenser | 120 × 260 | L × H |
| Left sideGravity dispenser | 100 × 260 | W × H |
| Right sideGravity dispenser | 100 × 260 | W × H |
| BaseGravity dispenser | 120 × 100 | L × W |
| Sloping roofGravity dispenser | 120 × 115.2 | L × – |
| Front panelGravity dispenser | 120 × 122.8 | L × – |
| Glue flap ×2Gravity dispenser | 96 × 12 | – |
| Dust flap ×2Gravity dispenser | 111.2 × 18 | – |
| Retaining lipGravity dispenser | 120 × 20 | L × – |
| Roof tuckGravity dispenser | 120 × 20 | L × – |
| Glue flapGravity dispenser | 12 × 120.8 | – |
| Glue flap ×2Gravity dispenser | 12 × 18 | – |
| Feed rampFeed ramp | 119 × 103.1 | L − 2T × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Front heightmm
- Mouth heightmm
- Retaining lipmm
- Ramp risemm
Ready-sized sloped-top gravity-feed dispenser presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this sloped-top gravity-feed dispenser yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.