Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-GRAVITY-DISPENSER-01Display
Tea bag gravity dispenser dieline
A tall dispenser carton with a sloping roof, an internal ramp and a low front mouth with a retaining lip. A ready-sized preset of the sloped-top gravity-feed dispenser — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside80 × 80 × 180 mm
Outside81.2 × 81.2 × 181.2 mm
Flat blank333.8 × 381.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-GRAVITY-DISPENSER-01
- Inside size
- Width 80 · Depth 80 · Back height 180 mm
- Size range
- Width 50–400 · Depth 40–300 · Back height 100–600 mm
- Manufacturing
- 80.6 × 80.6 × 180.6 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Gravity dispenser, Feed ramp
- Board area
- 0.076 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- Folding boxboard 400 g · 0.6 mm caliper
- Board options
- SBS 350FBB 400Kraft 350E-flute WF-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-GRAVITY-DISPENSER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.6 mm for Folding boxboard 400 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BackGravity dispenser | 80 × 180 | – × H |
| Left sideGravity dispenser | 80 × 180 | – × H |
| Right sideGravity dispenser | 80 × 180 | – × H |
| BaseGravity dispenser | 80 × 80 | – |
| Sloping roofGravity dispenser | 80 × 89.3 | – |
| Front panelGravity dispenser | 80 × 93.4 | – |
| Glue flap ×2Gravity dispenser | 76 × 12 | – |
| Dust flap ×2Gravity dispenser | 85.3 × 18 | – |
| Retaining lipGravity dispenser | 80 × 12 | – |
| Roof tuckGravity dispenser | 80 × 20 | – |
| Glue flapGravity dispenser | 12 × 91.4 | – |
| Glue flap ×2Gravity dispenser | 12 × 10 | – |
| Feed rampFeed ramp | 78.8 × 81.7 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Front heightmm
- Mouth heightmm
- Retaining lipmm
- Ramp risemm
The sloped-top gravity-feed dispenser family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tea bag gravity dispenser yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.