Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-STACK-DISPLAY-TRAY-01Display
Stacking open-front display tray dieline
An open-front corrugated tray with a low lip and sloping sides; raised lugs on the side walls lock into edge seats in the base of the tray above, so modules stack into a display tower. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 250 × 120 mm
Outside303.2 × 253.2 × 123.2 mm
Flat blank556 × 406 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-STACK-DISPLAY-TRAY-01
- Inside size
- Width 300 · Depth 250 · Back height 120 mm
- Size range
- Width 120–800 · Depth 100–600 · Back height 40–400 mm
- Manufacturing
- 301.6 × 251.6 × 121.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.178 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteEB double
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-STACK-DISPLAY-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 300 × 250 | L × W |
| Back wall | 300 × 120 | L × H |
| Front lip | 300 × 36 | L × – |
| Left side | 128 × 250 | – × W |
| Right side | 128 × 250 | – × W |
| Glue flap ×2 | 25 × 115.8 | – |
| Glue flap ×2 | 25 × 31.8 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Stacked modulescount
- Front lip heightmm
- Level side depthmm
- Stacking lug widthmm
- Stacking lug heightmm
- Doubled back and lipon / off
Ready-sized stacking open-front display tray presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this stacking open-front display tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.