Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-STACK-DISPLAY-TRAY-01Display
Stacking display tray with doubled walls dieline
An open-front corrugated tray with a low lip and sloping sides; raised lugs on the side walls lock into edge seats in the base of the tray above, so modules stack into a display tower. A ready-sized preset of the stacking open-front display tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 250 × 120 mm
Outside303.2 × 253.2 × 123.2 mm
Flat blank556 × 564.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-STACK-DISPLAY-TRAY-01
- Inside size
- Width 300 · Depth 250 · Back height 120 mm
- Size range
- Width 120–800 · Depth 100–600 · Back height 40–400 mm
- Manufacturing
- 301.6 × 251.6 × 121.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.225 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteEB double
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-STACK-DISPLAY-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 300 × 250 | L × W |
| Back wall | 300 × 120 | L × H |
| Front lip | 300 × 36 | L × – |
| Left side | 128 × 250 | – × W |
| Right side | 128 × 250 | – × W |
| Glue flap ×2 | 25 × 115.8 | – |
| Back wall roll | 294.8 × 3.4 | – |
| Glue flap ×2 | 25 × 31.8 | – |
| Front lip roll | 294.8 × 3.4 | – |
| Back wall inner ply | 294.8 × 118 | – |
| Front lip inner ply | 294.8 × 34 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Stacked modulescount
- Front lip heightmm
- Level side depthmm
- Stacking lug widthmm
- Stacking lug heightmm
- Doubled back and lipon / off
The stacking open-front display tray family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this stacking display tray with doubled walls yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.