Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TAG-HEX-POINT-01Cards & tags
Point-top hexagon hang tag dieline
43.3 × 50 mm regular hexagon swing tag hung from a vertex, with a 4 mm string hole below the point. A ready-sized preset of the sticker & label — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside43.3 × 50 mm
Outside43.3 × 50 mm
Flat blank43.3 × 49.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TAG-HEX-POINT-01
- Inside size
- Width 43.3 · Height 50 mm
- Size range
- Width 10–300 · Height 10–300 mm
- Manufacturing
- 43.3 × 50 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.002 m² · about 320 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 300 g · 0.42 mm caliper
- Board options
- Label glossClear BOPPPaper 170SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Profile2 options
- Shape18 options
- Corner radiusmm
- Hexagon orientation2 options
- Lobe / wing sizemm
- Curl corner4 options
- Hang hole3 options
- Hole sizemm
- Hole from topmm
- Cut2 options
The sticker & label family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this point-top hexagon hang tag yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.