Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-VINYL-01Labels
7 inch jukebox single dieline
A grooved vinyl disc with printed centre labels on both sides. Exports the A and B side paper labels with the spindle hole; pair it with the record jacket for a full LP. A ready-sized preset of the vinyl record — change its size and the cut outline, bleed and safe area are redrawn to match.
InsideØ 175 × 1.5 mm
OutsideØ 175 × 1.5 mm
Flat blank90 × 90 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-VINYL-01
- Inside size
- Record diameter 175 · Disc thickness 1.5 mm
- Size range
- Record diameter 150–310 · Disc thickness 1–4 mm
- Manufacturing
- Ø 175 × 1.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Side A centre label, Side B centre label
- Board area
- 0.013 m² · about 80 up on a 720 × 1020 mm sheet
- Default board
- Matte label stock · 0.08 mm caliper
- Board options
- Label matteLabel gloss
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Centre label diameter (0 = auto)mm
- Centre hole2 options
- Vinyl colour6 options
- Print side B labelon / off
The vinyl record family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 7 inch jukebox single yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.