Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-PATTERNED-LID-01Mailer
Hinged mailer with patterned lid slots dieline
A hinged-lid tray whose lid side flaps catch in L-shaped cuts in the side walls, with a front tongue and rear holes. A ready-sized preset of the hinged mailer with side catches — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 200 × 80 mm
Outside303.2 × 203.2 × 83.2 mm
Flat blank460 × 585 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-PATTERNED-LID-01
- Inside size
- Length 300 · Width 200 · Height 80 mm
- Size range
- Length 80–500 · Width 60–400 · Height 30–250 mm
- Manufacturing
- 301.6 × 201.6 × 81.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.225 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KF-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-PATTERNED-LID-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 300 × 200 | L × W |
| Front | 300 × 80 | L × H |
| Back | 300 × 80 | L × H |
| Side wall ×2 | 80 × 200 | H × W |
| Lid | 300 × 200 | L × W |
| Glue flap ×4 | 76 × 20 | – |
| Front tongue | 292 × 25 | – |
| Lid side flap with catch ×2 | 41 × 194 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Rear hole diametermm
- Patterned lid slotscount
- Slot angle°
- Front tongue depthmm
The hinged mailer with side catches family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this hinged mailer with patterned lid slots yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.